KitchenAid 720-0745A Instructions D'installation Et Guide D'utilisation Et D'entretien page 10

11. Remove the 2 screws from the side burner valve assembly.
See illustration in Step 13.
12. Push the valve stem out through the opening in the front of the
side burner shelf, lining up the holes in the side burner valve
assembly with the openings on the side burner shelf. See
illustration in Step 13.
13. Slide the bezel opening over the valve stem and attach the
side burner valve assembly and bezel to the side burner shelf
with the screws removed in Step 9.
A
14. Replace the searing side burner, angling it so that the side
burner tube slides over the valve orifice.
10
B
A. Bezel
B. Valve stem
15. Connect electrical plugs on underside of sear burner.
A
A. Electrical plug from grill
B. Electrical plug from sear burner
16. Insert the valve stem into the knob and push knob into place.
17. The igniter battery is not factory installed. A "AA" size alkaline
battery is located in the accessory box on the grill grate. Install
battery at this time following the instructions in "Replacing the
Igniter Battery" section.
18. Attach Cart Basket: Unscrew 2 screws on the side panel and 2
screws on the bottom panel. Tighten above 4 screws.
B