Install The Wall Plate On The Wall - Epson BrightLink 575Wi Guide D'installation

C

Install the wall plate on the wall

1. Determine the template sheet position.
•
From the projection distance table, confirm the screen size (S) and the distance between the
projection surface and wall plate (c).
•
Align the Image Center line (vertical) of the template sheet with the center line (vertical) of the
projection surface.
Confirm where the beams or studs are within the wall, and shift the position of the template left or
right as necessary.
The position can be shifted horizontally left or right from the center line of the projection surface up
to a maximum of 1.77 in. (45 mm.)
•
Align the line (horizontal) on the template with the height of (c).
Image Center line of template sheet
line of template sheet
2. Attach the template sheet to the wall.
If you need to install a junction box, you can use the cutout areas in the wall plate for the box. The
junction box needs to be recessed into the wall if you want to use the wall plate cover.
2.8 in.
(70.5 mm)
26
Center line of
projection surface