Attaching A Security Cable - Epson BrightLink 575Wi Guide D'installation

8 Appendix
Using the Easy Interactive Function (BrightLink models only)
After you install a BrightLink model, you need to perform calibration to align the positions of the cursor and
interactive pens.
In order to use the Easy Interactive Tools software, you must first install the software on the computer. OS X
users also need to install a driver that enables the pen to work. Both software programs are included with the
BrightLink projector.
For details, see the online User's Guide or visit:
U.S.: epson.com/support/brightlinkdownloads
Canada: epson.ca/support/brightlinkdownloads
Latin America: global.latin.epson.com/Soporte (website available only in Spanish)

Attaching a Security Cable

If the projector is to be installed in a room where it will be left unattended, you can use a commercially
available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from
taking it.
Pass the wire for the theft-prevention wire lock through the security cable installation point.
For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock.
After installation of the projector is complete, make sure you leave the remote control,
batteries, and CDs in the room with the projector. For BrightLink, also leave the pen(s),
batteries, pen tray, and battery charger in the room with the projector.
42