Epson BrightLink 575Wi Guide D'installation page 25

3. Attach the 3-axis adjustment unit to the wall mount.
•
Decide which position you want to use for installing the 3-axis adjustment unit.
Mount it at the stamp when the image is less than 75 inches (diagonally), or at the
when the projected image is 75 inches or more (diagonally).
: Less than 75 inches
•
Tighten the M4 x 12 mm hexagon socket head cap bolts (x4) supplied to install the 3-axis adjustment
unit.
M4 x 12 mm hexagon socket
head cap bolts
Spring washer
Washer
Bolt installation positions
When the diagonal image is less than 75 inches
: 75 inches or more
When the diagonal image is 75 inches or more
25
stamp