Package Contents - Epson BrightLink 575Wi Guide D'installation

1 Package Contents

Wall mount
3-axis adjustment unit and slide
plate (attached when shipped)
Hexagon wrench (for M4)
VGA computer cable (may be included
with projector or wall mount)
Shape
M4 x 12 mm hexagon socket head cap bolt with
washer/spring washer
M6 x 20 mm hexagon shoulder bolt with washer/
spring washer
M6 x 20 mm cross recessed head shoulder screw
with plastic washer
•
Use the bolts or screws supplied with the wall mount to install it as directed in this guide. Do not
substitute these bolts with any other types.
•
You need to use commercially available M10 x 60 mm anchors (at least 3) to attach the wall plate to the
wall.
•
Gather the tools and parts you need before you begin installation, including a #3 cross-head screwdriver.
Hexagonal shaft
Wall plate cover extender
End cap
Open-ended wrench
13 mm (for M8 and M6) x
6 mm (for hexagonal
shaft)
Name
5
Wall plate
Wall plate cover
Template sheet
(for installing the wall plate)
Quantity Application
6 For wall plate assembly
4 For 3-axis adjustment unit/wall mount
installation
4 For slide plate/projector installation
2 For slide plate/3-axis adjustment unit
installation (secured when shipped)
1 For wall mount/wall plate installation
3