Catalytic Converter; Adjusting The Headlight Beams - Benelli IMPERIALE 400 Manuel Du Propriétaire

Instrument and control functions

Catalytic converter

This model is equipped with a catalytic
converter in the exhaust system.
EN
WARNING
3
The exhaust system is hot after opera-
tion.
To prevent a fire hazard or burns:
• Do not park the vehicle near pos-
sible fire hazards such as grass or
other materials that easily burn.
• Park the vehicle in a place where
pedestrians or children are not
likely to touch the hot exhaust sy-
stem.
• Make sure that the exhaust system
has cooled down before doing any
maintenance work.
• Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of heat.
NOTICE
Use only unleaded gasoline. The use of
leaded gasoline will cause unrepairable
damage to the catalytic converter.
3 - 14

Adjusting the headlight beams

The headlight beam adjusting screw is
used to raise or lower the height of the
headlight beams. It may be necessary to
adjust the headlight beams to increase
visibility and help prevent blinding onco-
ming drivers when carrying more or less
load than usual.
Obey local laws and regulations when
adjusting the headlights.
To raise the light beams, turn the screw
clockwise (A).
To lower the light beams, turn the screw
counterclockwise (B).
A
B