Oceanic OCEACLIM140W Guide D'utilisation page 51

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. Timer
The timer can be set between 1 to 24 hours. Press the button "+" or "-" to
increase or decrease the duration. Each press increases or decreases the time
by one hour.
Automatic Off: when the appliance is running, press the
desired duration after which the appliance will be switched off. Allow the number
of hours on the LCD flashes for a few seconds until the timer indicator light on
the left illuminates. Afterwards, the LCD will resume displaying the set
temperature.
Automatic On: when the appliance is connected to electricity but not turned on,
press the
button, set the desired duration after which the appliance will be
turned on. Allow the number of hours on the LCD flashes for a few seconds until
the LCD goes off, and the timer indicator light on the left remains illuminating.
6. Dehumidifier function
When the Dehumidifier mode
bottom will work for 8 minutes then stop for 6 minutes. They will resume
functioning automatically afterwards and repeat the cycle.
Remarks:
- The fan above will work at a slow speed during on Dehumidifier mode (slow
by default). Moderate and fast speed are not supported in this mode.
- The setting of temperature is not supported in this operation mode.
:
:
is selected, the compressor and the fan at the
50
button and set the

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Ygp41-1170

Table des Matières