Specifications; Nail Selection - Hitachi NT 65M2 Manuel D'instructions

SPECIFICATIONS

Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption

NAIL SELECTION

● Be sure to use only the genuine HITACHI nails for the NT65M2 (S).
The use of any other nails can result in tool malfunction and/or
nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
16 Gauge finish nails
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
11-5/8" × 11-7/32" × 2-51/64"
(295 mm × 285 mm × 71 mm)
3.7 lbs. (1.7 kg)
100 Nails (2 Strips)
.042 ft
(1.20 ltr/cycle at 6.9 bar)
(1.20 ltr /cycle at 7 kgf/cm
WARNING
Dimensions of nails
Min.
.110" (2.8mm)
.054"
(1.4mm) (1.65mm)
3
/cycle at 100 psi
2 )
.065"
English
2
)
Max.
9