Transportation, Storage And Disposal; Activate Frost Protection; Disposing Of Old Appliance; Customer Service - Siemens EQ 500 integral Série Notice D'utilisation

en Transportation, storage and disposal

Transportation, storage and disposal

Transportation, storage
and disposal
You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.

Activate frost protection

Protect your appliance from frost dur-
ing transport and storage.
ATTENTION!
Residues of liquid in the appliance
may damage it during transport or
storage.
Empty the pipe system before
▶
transport or storage.
Requirements
¡ The appliance is ready to use.
¡ The water tank has been filled.
Remove the milk container.
1.
Clean the brewing unit.
2.
→ "Cleaning brewing unit",
Page 66
Place a large container under the
3.
outlet system.
Press repeatedly until the dis-
4.
play shows "Milk froth".
Press repeatedly until the dis-
5.
play shows 240 ml.
Press ⁠ .
6.
Wait until steam escapes from the
7.
appliance.
Remove the water tank.
8.
a The appliance drains itself auto-
matically.
If the message "Please refill water
9.
tank" appears, ignore it.
Empty and clean the water tank
10.
and drip tray.
Insert the water tank and drip tray.
11.
Switch the appliance off and dis-
12.
connect it from the power supply.
76

Disposing of old appliance

Valuable raw materials can be re-
used by recycling.
Unplug the appliance from the
1.
mains.
Cut through the power cord.
2.
Dispose of the appliance in an en-
3.
vironmentally friendly manner.
This appliance is labelled in ac-
cordance with European Direct-
ive 2012/19/EU concerning
used electrical and electronic
appliances (waste electrical and
electronic equipment - WEEE).
The guideline determines the
framework for the return and re-
cycling of used appliances as
applicable throughout the EU.

Customer Service

Customer Service
If you have any queries, are unable to
rectify faults on the appliance your-
self or if your appliance needs to be
repaired, contact Customer Service.
You can solve many problems your-
self by consulting the information on
troubleshooting in these instructions
or on our website. If this is not the
case, contact our after-sales service.
We always find an appropriate solu-
tion.
With any warranty claims, we will
make sure that your appliance is re-
paired by trained after-sales techni-
cians using genuine spare parts, in-
cluding after the manufacturer's war-
ranty has expired.
Function-relevant genuine spare parts
according to the corresponding Eco-
design Order can be obtained from
Customer Service for a period of at
least 7 years from the date on which