Siemens EQ 500 integral Série Notice D'utilisation page 48

Masquer les pouces Voir aussi pour EQ 500 integral Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en Safety
▶ Never pull on the power cord to unplug the appliance. Al-
ways unplug the appliance at the mains.
▶ If the appliance or the power cord is damaged, immediately
unplug the power cord or switch off the fuse in the fuse box.
▶ "Call Customer Service." → Page 76
▶ Repairs to the appliance should only be carried out by
trained specialist staff.
¡ Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out by
trained specialist staff.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be
replaced by the manufacturer, the manufacturer's Customer
Service or a similarly qualified person in order to prevent
any risk.
¡ An ingress of moisture can cause an electric shock.
▶ Never immerse the appliance or the power cord in water.
▶ Liquids must not be spilled on the appliance plug connec-
tion.
▶ Only use the appliance in enclosed spaces.
▶ Never expose the appliance to intense heat or humidity.
▶ Do not use steam- or high-pressure cleaners to clean the
appliance.
WARNING ‒ Risk of fire!
¡ The appliance will become hot.
▶ Ventilate the appliance adequately.
▶ Never operate the appliance in a cupboard.
¡ It is dangerous to use an extended power cord and non-ap-
proved adapters.
▶ Do not use extension cables or multiple socket strips.
▶ If the power cord is too short, contact Customer Service.
▶ Only use adapters approved by the manufacturer.
WARNING ‒ Risk of burns!
Some parts of the appliance become very hot.
▶ Never touch hot appliance parts.
48

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tq5 série

Table des Matières