Designated Use; Installation And Safety Instructions - Zivan NG7 Manuel D'installation Et D'utilisation

English
ATTENTION: To reduce the risk of
electric shock, do not remove cover.
Refer servicing to qualified service personnel.
Disconnect the mains supply before connecting
or disconnecting the links to the battery.
Read the Instruction Manual carefully
before use. Verify that the selected
charge curve is suitable for the type
of battery You have to re-charge.
Explanation of Graphical Symbols:
Is intended to alert the user to the presence of un-insulated
"dangerous voltage" within the equipment's enclosure; that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the
equipment.
This product is covered by warranty. The relative warranty certificate is attached to the Instructions Manual.
If the Manual is not provided with this certificate, please ask your retailer for a copy.
Information contained in this Manual relates to ZIVAN S.r.l. property which reserves the right to supply for the exclusive use of customers.
No other use is allowed without a written authorization supplied by ZIVAN S.r.l.
ZIVAN S.r.l. will be not responsible for inaccuracies contained in this manual due to print or translation errors. ZIVAN S.r.l. has the right to
make changes or improvements, also for the user interest, without prejudicing the essential characteristic of operation and safety.

Designated use

The current generator is an electronic appliance, only for professional use,
depending on the firmware installed.

Installation and safety instructions

The current generator has been designed to provide safety and reliable. It is necessary to observe the following precautions in order to avoid
damage to persons and to the equipment:
Read the installation instructions contained in this Manual carefully. For further information put the Manual in a proper place.
•
Fix the equipment to a stable surface through the appropriate holes inserted on the fixing flanges. In case of installation on a vehicle it
•
is advisable to use anti-vibration supports.
Preferably the equipment should be installed in the vertical position with the fan facing up. The horizontal installation is allowed. Never
•
install in the vertical position with the fan facing down.
Ensure all ventilation ports are not obstructed, to avoid the overheating. Do not put the equipment near heat sources. Make sure that
•
free space around the equipment is sufficient to provide adequate ventilation and an easy access to cables sockets.
Ensure that no flammable materials are stored in the area surrounding the charger.
•
Protect the equipment from ingress of water. Do not pour liquids inside the case.
•
Verify that the available supply voltage corresponds to the voltage that is stated on the equipment name plate. In case of doubt, consult
•
a retailer or local Electric Supply Authority.
As protection device in the input of the equipment You can both use a switch of AC class, but it is warmly recommended to use one of
•
A class or even better one of B class.
For safety and electromagnetic compatibility, the equipment has a 4-prong plug as a safety feature, and it will only fit into an earthed
•
outlet. If you can not plug it in, chances are you have an older, non-earthed outlet; contact an electrician to have the outlet replaced. Do
not use an adapter to defeat the grounding.
To avoid damaging the power cord, do not put anything on it or place it where it will be walked on. If the cord becomes damaged or
•
frayed, replace it immediately.
If you are using an extension cord or power strip, make sure that the total of the amperes required by all the equipment on the
•
extension is less than the extension's rating.
To recharge Lead Acid batteries: WARNING: Explosive Gas – Avoid flames and sparks. The battery must be positioned in a correctly
•
cooled place.
Do not use to charge batteries installed on board of thermal engine cars.
•
Avoid recharging of non-rechargeable batteries.
•
Verify that the selected charging curve is suitable for the type of battery to be re-charged. In case of doubt, consult Your retailer. ZIVAN
•
S.r.l. will not accept any responsibility in case of mistaken choice of the charging curve that may cause irreversible damage to the
battery.
In order to avoid voltage drop, thereby assuring 100% charge at the battery, the output cables must be as short as possible, and the
•
diameter must be adequate for the output current.
Do not try to service the battery charger yourself. Opening the cover may expose you to shocks or other hazards.
•
If the battery charger does not work correctly or if it has been damaged, unplugged it immediately from the supply socket and from the
•
battery socket and contact a retailer.
10
CG NG7 CAN Bus Interface
developed to recharge or maintenance of different battery types
During operation it is possible that some parts of the
product reach high temperatures.
The product suffers from moisture: ensure
installation prevents any liquids
Warning to user: some contact surfaces may
become hot.
Warning to user: the product suffers from humidity.
entering.
D01826-05