General Safety Rules - Genesis GPCS535KM Manuel D'utilisation

SPECIFICATIONS
Model: ----------------------------- GPCS535KM
Rated Power: ---------------------- 120V~ / 60Hz, 5A
No-Load Speed: ------------------- 5500 RPM
Blade Diameter: ------------------- 3-1/2"
Arbor Size: ----------------------- 3/8" (10mm)
Max Cutting Depth: --------------- 1-1/8"
Net Weight: ------------------------ 5.0 lb.
Includes: 24T carbide-tipped blade, 80T HSS blade, Diamond blade for tile, Rip guide, Vacuum adaptor, Miter
base assembly, Allen key and Storage case.
WArNING:
operator's manual before operating this tool. Save this manual for future reference.
Toll-Free Help Line: 1-888-552-8665
WeAR YOuR
SAfeTY GLASSeS
fOReSIGHT IS BeTTeR
THAN NO SIGHT
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.

GENErAL SAFETY rULES

WArNING:
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
WArNING:
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
Plunge Circular Saw with Miter Base
Operator's Manual
T
o reduce the risk of injury, user must read and understand this
WArNING:
being thrown into your eyes, which can result in severe eye damage. Before beginning
tool operation, always wear safety goggles or safety glasses with side shields and a
full face shield when needed. We recommend Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always wear eye protection
which is marked to comply with ANSI Z87.1.
Some dust created by power sanding, sawing, grinding, drilling,
read and understand all warnings, cautions and operating
SAVE THESE INSTRUCTIONS
The Operation of any power tool can result in foreign objects
GPCS535KM