Tecno-gaz ONYX B 5.0 Mode D'emploi page 60

ENGLISH
After the printer installation (optional accessory), is possible to print the traceability
adhesive labels to be stuck on the wrap before starting sterilization is entered.
▲
▬
Press the central button to move to the next selection.
▲
• USE OSMOSI'S SYSTEM : On / Off with the button
osmosis device (
disconnected.
• CYCLES SINCE CHG: Cycles from the last change of filters are visualized.
• RESET OSMOSI COUNTER: It allows you to reset the counter when you replace the
filters
.
• CYCLES PERFORMED: Cycles from the last change of filter are visualized.
• RESET COUNTER: It allows you to reset the counter when you replace the filter.
16
EXTERNAL PRINTER
00
▼
00
▼
SETUP OSMOSIS SYSTEM
). When the system is activated the charge pump is
optional
BACTERIOLOGIC FILTER
When the box flashes press the arrows to
select the number of labels to be printed.
When the box flashes press the arrows to
select the number of months before expiry.
Press the central button for the last time to
display the final selection page.
▬
the supply system with