Features; Assembly - Ryobi RY08420A Manuel D'utilisation

PRODUCT SPECIFICATIONS
Engine Displacement....................................................42cc
KNOW YOUR BLOWER
See Figures 1 - 2.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
ADJUSTABLE HARNESS AND WAIST STRAPS
The blower comes with fully adjustable harness and waist
straps to ensure user comfort and ease of operation.
ADJUSTABLE THROTTLE CONTROL HANDLE
Easily adjust throttle control handle by loosening handle
knob to position handle in desired location.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.

FEATURES

Air Velocity:
MPH ........................................................................... 185
CFM ........................................................................... 510
CRUISE CONTROL
The cruise control feature allows the user to operate the
blower without holding the throttle.
ENGINE
The blower has a powerful 42cc engine with sufficient power
to handle tough jobs.
MESH BACKING
The blower comes equipped with a mesh backing which
aids in user comfort.
THROTTLE TRIGGER
The blower can be operated at any speed between idle and
full throttle.

ASSEMBLY

PACKING LIST
Backpack Blower
Bellows
Throttle Control Handle Tube
Straight Tube
Nozzle
Large Tube Clamp (upper)
Small Tube Clamp (lower)
2-Cycle Engine Lubricant
Assembly Tool
Operator's Manual
NOTE: Read and remove all hang tags and store with your
operator's manual.
6 — English