Installing The Outlet Air Pipe Through An Exterior Wall; Guidelines When Installing The Outlet Air Pipe - Cinderella GAS Manuel D'installation

NB!
On installation of the appliance, the technical and administrative regulations of the country in which the toilet is
installed must be adhered to. We recommend that you contact your local retailer to plan and install your
Cinderella GAS appliance.

6.6 INSTALLING THE OUTLET AIR PIPE THROUGH AN EXTERIOR WALL

1. In the centre line of the Cinderella's chosen position, make a mark on the wall for the outlet air pipe 414 mm
(16 inches) from the floor.
3/8
2. Drill a pilot hole with a long drill bit through the wall. Make sure you are holding the drill perpendicular to
the floor.
3. Expand the hole to fit the supplied ventilation pipe
4. Install the supplied ventilation adapter and ventilation pipe.
5. Mount a T-bend with smooth curves
6. Mount the vertical pipe and fix it to the wall with wall brackets.
7. Mount the ventilator cowl on top of the pipe.

6.7 GUIDELINES WHEN INSTALLING THE OUTLET AIR PIPE

NB!
The pipe must be installed vertically above the roof
and extend at least 600 mm (2 ft) above the roof
surface
Maximum length vertical pipe 13 feet (4 m)
No bends allowed.
NB!
When installing the ventilation pipes indoors you will have to connect the
drain pipe to the T-bend to prevent condensation and rainwater from
draining onto the floor. Failure to collect the water may result in the floor
being damaged.
Min
600 mm (2ft)
Max
13 feet (4m)
9