BFT VISTA-TL Série Instructions D'utilisation Et D'installation page 62

it is advisable to observe certain rules of behaviour
so that accidental problems can be avoided:
- Keep adults, children and property out of range of
the automated system, especially while it is moving.
- Do not allow children to play or stand within range
of the automated system.
- This automated system is not meant for use by
children or by people with impaired mental, phy-
sical or sensory capacities, or people who do not
have suitable knowledge, unless a person who is
responsible for their safety provides them with
necessary supervision or instructions on how to
use the device.
- Children must be supervised to ensure they do not
play with the device. Do not allow children to play
with the fixed controls. Keep remote controls out
of reach of children.
- Do not work near hinges or moving mechanical
parts.
- Do not hinder the leaf's movement and do not
attempt to open the door manually unless the ac-
tuator has been released with the relevant release
knob.
- Keep out of range of the motorized door or gate
while they are moving.
- Keep remote controls or other control devices out
of reach of children in order to avoid the automated
system being operated inadvertently.
- The manual release's activation could result in un-
controlled door movements if there are mechanical
faults or loss of balance.
- When using roller shutter openers: keep an eye
on the roller shutter while it is moving and keep
people away until it has closed completely. Exercise
care when activating the release, if such a device
is fitted, as an open shutter could drop quickly in
the event of wear or breakage.
- The breakage or wear of any mechanical parts of
the door (operated part), such as cables, springs,
supports, hinges, guides..., may generate a hazard.
Have the system checked by qualified, expert per-
sonnel (professional installer) at regular intervals
according to the instructions issued by the installer
or manufacturer of the door.
- When cleaning the outside, always cut off mains
power.
- Keep the photocells' optics and illuminating in-
dicator devices clean. Check that no branches or
shrubs interfere with the safety devices.
- Do not use the automated system if it is in need of
repair. In the event the automated system breaks
down or malfunctions, cut off mains power to the
system; do not attempt to repair or perform any
other work to rectify the fault yourself and instead
call in qualified, expert personnel (professional
installer) to perform the necessary repairs or main-
tenance. To allow access, activate the emergency
release (where fitted).
- If any part of the automated system requires direct
work of any kind that is not contemplated herein,
employ the services of qualified, expert personnel
(professional installer).
- At least once a year, have the automated system, and
especially all safety devices, checked by qualified,
expert personnel (professional installer) to make
62
- VISTA TL (ARIA-EVO)
sure that it is undamaged and working properly.
- A record must be made of any installation, main-
tenance and repair work and the relevant docu-
mentation kept and made available to the user on
request.
- Failure to comply with the above may result in
hazardous situations.
SCRAPPING
Materials must be disposed of in accordance
with the regulations in force. Do not throw
away your discarded equipment or used bat-
teries with household waste. You are respon-
sible for taking all your waste electrical and
electronic equipment to a suitable recycling
centre.
Anything that is not explicitly provided for in the
user guide is not allowed. The operator's proper
operation can only be guaranteed if the instruc-
tions given herein are complied with. The Firm
shall not be answerable for damage caused by
failure to comply with the instructions featured
herein.
While we will not alter the product's essential
features, the Firm reserves the right, at any time,
to make those changes deemed opportune to
improve the product from a technical, design or
commercial point of view, and will not be required
to update this publication accordingly.
2) MAINTENANCE
• For any symptom of anomaly or malfunction, only
refer to qualified personnel.
• Carry out a periodical revision of the automa-
tion system every 6 months or, in any case, after
1,000,000 manoeuvres.
3) EMERGENCY MANOEUVRE
3.1) Without locking devices or buffer batteries
(Fig. 1).
Open the doors by manually pushing the leaves in
the slide-open direction, or, when the SASAM 1-2
break-open system is installed, simply push the
leaves open towards the escape route.
3.2) With ERV mod. electric lock (Fig. 2).
When the ERV mod. device is fitted, activate the
manual release control. The control lever is situated
near the motor drive. When the lever (Fig. 2 Rif. A)
is pulled downwards, the electric lock is manually
released and the leaves can be pushed by hand in
the slide-open direction. To restore the electric lock,
push the lever upwards (Fig. 2 Rif. A).
Refer to the specific assembly instructions to install
the ERV manual release.
WARNING! The installer undertakes to instruct
the user on how to use the release for emergency
operation.
3.3) With breakout door devices mod. SASAM1-2
(Fig. 3)
In the case of breakout doors, simply pushing the door
leaves head on causes them to swing open like a hinged
door in the direction of the indicated escape route. When
breakout doors are operated, an electric contact locks out
the automated system until the door leaves have been