Common Screen Operations - JVC KW-V40BT Mode D'emploi

Masquer les pouces Voir aussi pour KW-V40BT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BASICS
BASICS

Common screen operations

Common screen descriptions
You can display other screens any time to change
the source, show the information, or change the
settings, etc.
Source control screen
Performs source playback operations.
• The operation buttons vary depending on the
selected source.
1
2
3
4
5
Common operation buttons:
1 Displays the screen of the App from the
connected iPod touch/iPhone.*
2 Displays the phone control screen.*
(Page 28)
3 Displays the sound adjustment screen.
(Page 33)
4 Activates/deactivates TA standby reception
mode. (Page 20)
5 Displays the <HOME> screen. (See the right
column.)
• Pressing HOME on the monitor panel also
displays the <HOME> screen.
Gesture control on the source control screen:
You can also control playback by moving your finger
on the touch panel as follows (for some sources, the
gesture control is not available).
• Sliding the finger towards up/down: Functions
same as pressing [ ]/[ ].
• Sliding the finger towards left/right: Functions
same as pressing [S]/[T].
• Moving your finger clockwise or counter-
clockwise: increases/decreases the volume.
<HOME> screen
Displays the source control screen/settings screen
and changes the picture source.
(Page 17)
1
2
*
3
4
Common operating buttons:
1 Changes the playback source. (Page 8)
2 Displays the phone control screen.*
1
2
3
5
6
7
8
(Page 28)
2
3 Displays the <Settings> screen. (See below.)
4 Returns to the previous screen.
5 Displays the source control screen. (See the far
left column.)
6 Displays the picture from the rear view camera.
(Page 23)
7 Displays the screen of the App from connected
iPod touch/iPhone.*
(Page 17)
1
8 Turns off the screen. (Page 6)
<Settings> screen
Changes the detailed settings. (Page 39)
1
2
3
Common operating buttons:
1 Selects the menu category.
2 Changes the page.
3 Returns to the previous screen.
4 Displays the current source control screen.
*
Appears when <Input> in <Navigation Input> is set to
1
[iPhone]. (Page 17)
*
Only for KW-V40BT/KW-V20BT .
2
*
3
The icon varies depending on the connection status of the Bluetooth
device. (Page 25)
4
ENGLISH
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kw-v20btKw-v10

Table des Matières