Removing The Unit - JVC KW-V40BT Mode D'emploi

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Installing/removing the unit
Installing the unit
• Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
Installing the trim plate
Attach the trim plate (2).
48
Removing the trim plate
1
Engage the catch pins on the extraction
key (4) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
2
Remove the upper two locations.
2
• The frame can be removed from the top side in
the same manner.
1
2
4
• Be careful to avoid injury from the catch pins on

Removing the unit

Remove the trim plate. (See the left
column.)
Insert the two extraction keys (4), then
pull them as illustrated so tat the unit can
be removed.
4
the extraction key.