Changing Between Input Terminals [Ll-171G]; Turning The Power Off - Sharp LL-171A Mode D'emploi

Connecting the monitor and turning the monitor on and off
Changing between input terminals
[LL-171G]
Use the INPUT button to switch between signal
input terminals.
Analog RGB input terminal DVI-I input terminal
INPUT
INPUT-1
<ANALOG>
When using a 2-input cable
Analog RGB input terminal
INPUT-1
<ANALOG>
INPUT
DVI-I input terminal
(analog)
INPUT
INPUT2-A
<ANALOG>
Note:
- When there is no input signal, [NO SIGNAL] is
displayed.
INPUT-2
< >
<ANALOG> or <DIGITAL>
INPUT
DVI-I input terminal
(digital)
INPUT2-D
<DIGITAL>

Turning the power off

1. Turn the computer off.
2. Press the monitor's power button.
The power LED will disappear.
Turn the computer
off.
OFF
If the monitor will not be used for a long time, turn
off the main power switch of the monitor, and
remove the power plug from the outlet.
16
Press power button.