Replacing Discs While Playing A Disc; Locating A Specific Disc - Sony CDP-CE515 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Playing CDs
Replacing Discs While Playing
a Disc
You can open the disc tray while playing a disc so that
you can check what discs are to be played next and
replace discs without interrupting playback of the
current disc.
1
Press EX-CHANGE.
The disc tray opens and two disc compartments
appear. Even if the player is playing a disc, it
doesn't stop playing.
2
Replace discs in the compartments with new ones.
The player plays the disc on the left side
compartment after the current disc, and then the
one on the right side compartment.
3
Press DISC SKIP.
The disc tray turns and other two disc
compartments appear.
4
Replace discs in the compartments with new ones.
5
Press EX-CHANGE.
The disc tray closes.
While the disc tray is open by pressing the EX-CHANGE
button
• If the playback of the current disc ends, the player stops
playing. If the disc is played in 1 DISC Repeat Play mode
(see page 14), the current disc starts playing again.
• In ALL DISCS Shuffle Play mode (see page 14), tracks are
reshuffled on the current disc.
• In Program Play mode (see page 15), only the tracks on the
current disc are played.
• Do not push the disc tray to close it in Step 5, as you may
damage the player.
EN
12
EX-CHANGE
DISC SKIP

Locating a Specific Disc

You can locate any disc before or while playing a disc.
DISC 1 – 5
DISC CHECK*
DISC
DISC SKIP +
To locate
Press
The next disc
DISC SKIP while playing a disc.
When using the remote, press
DISC SKIP +.
A specific disc directly
DISC 1 – 5.
When using the remote, follow
the procedure below.
1 Press DISC.
2 Press the number button of
3 Press ENTER.
A disc while checking the
DISC CHECK while the disc
labels (CDP-CE515 only)
tray is open. The disc tray turns
to show you each disc label.
When the disc you want comes
in front of you, press · to
start playing.
A disc by scanning the first
DISC CHECK before you start
track of each disc for 10
playing while the disc tray is
seconds (CDP-CE515 only)
closed. When you find the disc
you want, press · to start
playing.
· DISC SKIP
*CDP-CE515 only
Number
buttons
ENTER
·
the disc.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cdp-c460z

Table des Matières