Replacing Discs While Playing A Disc - Sony CDP-CE545 Mode D'emploi

Playing CDs
Selecting the language of the CD TEXT
information
You can select the language used to display the CD
TEXT information when you select a CD TEXT disc
with multi-language information.
Once you select the language, the display shows the
information in the selected language until you turn off
the player. If the player cannot read the language
memorized in a CD TEXT disc, the player shows
"(other lang)."
1
Press MENU in stop mode.
"SELECT LANG." flashes in the display.
ALL DISCS
DISC
S E L E C T L A N G .
2
Push l AMS L.
3
Turn l AMS L until the language you want
appears in the display.
4
Push l AMS L to select the language.
"Reading Text" appears momentarily, then the
display shows the information in the selected
language.
To check the current language
1 Press MENU while playing a CD TEXT disc.
"SHOW LANG." flashes in the display.
2 Push l AMS L.
The current language appears.
You can also check the current language while selecting a CD
TEXT disc without multi-language information.
Note
If you select a CD TEXT disc which does not contain the
information of the selected language, the display shows the
information in another language according to the disc's
preference.
12 GB
CD-TEXT
1 2 3 4 5 1 2 3 4
6 7
CD1
Replacing Discs While Playing
a Disc
You can open the disc tray while playing a disc so that
you can check what discs are to be played next and
replace discs without interrupting play of the current
disc.
5
8 9 10
1
Press EX-CHANGE.
The disc tray opens and two disc compartments
appear. Even if the player is playing a disc, it
doesn't stop playing.
2
Replace discs in the compartments with new ones.
The player plays the disc on the left side
compartment after the current disc, and then the
one on the right side compartment.
3
Press DISC SKIP.
The disc tray turns and other two disc
compartments appear.
4
Replace discs in the compartments with new ones.
5
Press EX-CHANGE.
The disc tray closes.
Note
Do not push the disc tray to close it in Step 5, as you may
damage the player.
While the disc tray is open by pressing the EX-CHANGE
button
• If the play of the current disc ends, the player stops
playing. If the disc is played in 1 DISC Repeat Play mode
(see page 14), the current disc starts playing again.
• In ALL DISCS Shuffle Play mode (see page 15), tracks are
reshuffled on the current disc.
• In Program Play mode (see page 16), only the tracks on the
current disc are played.
EX-CHANGE DISC SKIP