Intended Use; Product Features; Technical Data; Noise/Vibration Information - Bosch PSS 300 AE Notice Originale

OBJ_BUCH-62-002.book Page 15 Monday, December 3, 2007 12:54 PM

Intended Use

The machine is intended for dry sanding of wood,
plastic, filler and coated surfaces.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Thumbwheel for orbit frequency preselection
2 On/Off switch
3 Dust box, complete (micro filtersystem)
4 Sanding-sheet clamp
5 Sanding plate
6 Sanding sheet
7 Extraction outlet
8 Filter element (micro filtersystem)
9 Vacuum hose*
10 Perforating tool*
11 Screws for sanding plate
*The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools

Technical Data

Orbital sander
Article number
Rated power input
Preselection of orbital
stroke rate
No-load speed
Orbital stroke rate
Orbit diameter
Sanding sheet dimen-
sions
— Adhesion via Velcro
backing
— Attachment via clamp-
ing
Sanding plate dimen-
sions
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 84 dB(A); Sound
power level 95 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
2
tainty K <1.5 m/s .
English | 15
PSS 300 AE
3 603 C40 3..
W 250
7000 – 12000
rpm
opm 14000 – 24000
mm 1.8
mm 115 x 230
mm 115 x 280
mm 115 x 230
kg 1.9
/ II
2
=10.0 m/s , Uncer-
1 609 929 N23 | (3.12.07)