AEG IAE84881XB Notice D'utilisation page 19

Changing the modes
If you are not satisfied with the noise level /
fan speed, you can switch between modes
manually.
1. Touch .
Select Settings > Hob²Hood from the list.
2. Choose the appropriate mode.
To leave the Menu touch
of the display, outside of the pop-up window.
When you finish cooking and deactivate the
hob, the hood fan may still operate for a
certain period of time. After that time the
system deactivates the fan automatically and
prevents you from an accidental activation for
the next 30 seconds.
The light on the hood deactivates 2 minutes
after deactivating the hob.
6.17 Language
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Language from
the list.
3. Choose the appropriate language from
the list.
If you chose the wrong language, touch
A list appears. Select the third option from
the top, then the last but one option. Next,
select the second option. Scroll down to
choose the appropriate language from the
list. Finally, choose the option on the right.
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .
6.18 Key Tones / Buzzer Volume
You can choose the type of sound your hob
emits or turn the sounds off entirely. You can
choose between the click (default) or beep.
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Key Tones /
Buzzer Volume from the list.
3. Choose the appropriate option.
or the right side
.
or the right side
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .
6.19 Display Brightness
You can change the brightness of the
display.
There are 4 brightness levels, 1 is the lowest
and 4 is the highest.
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Display
Brightness from the list.
3. Choose the appropriate level.
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .
6.20 Power Management
If multiple zones are active and the
consumed power exceeds the limitation of
the power supply, this function divides the
available power between all cooking zones.
The hob controls heat settings to protect the
fuses of the house installation.
• Cooking zones are grouped according to
the location and number of the phases in
the hob. Each phase has a maximum
electricity loading of 3680 W. If the hob
reaches the limit of maximum available
power within one phase, the power of the
cooking zones will be automatically
reduced.
• The maximum heat setting is visible on
the slider. Only the digits in white are
active.
• If a higher heat setting is not available
reduce it for the other cooking zones first.
Refer to the illustration for possible
combinations in which power can be
distributed among the cooking zones.
or the right side
or the right side
ENGLISH 19