Miele Complete C3 Electro Plus Mode D'emploi page 29

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Reliable and safe operation of this vacuum cleaner can
only be assured if it has been connected to the mains elec-
tricity supply.
The socket on the vacuum cleaner (depending on
model) must only be used for the Miele Electrobrushes lis-
ted in these operating instructions.
The Miele Electrobrush is a motor driven accessory for
use only with Miele vacuum cleaners. For safety reasons,
the cleaner must not be used with an Electrobrush pro-
duced by another manufacturer.
While the vacuum cleaner is under guarantee, repairs
should only be undertaken by a Miele authorised service
technician. Otherwise the guarantee will be invalidated.
Do not use the vacuum cleaner if the cable is damaged.
If the cable is damaged it must be replaced together with a
complete cable rewind. For safety reasons this work must
be done by the Miele Service Department or a Miele au-
thorised service technician.
Do not pull or carry the vacuum cleaner by the cable,
and be careful not to damage the cable when withdrawing
the plug from the socket. Keep the cable away from sharp
edges and do not let it get squashed, for example, under a
door. Avoid running the vacuum cleaner over the cable.
This could damage the cable, plug or socket. The appli-
ance must not be used if any of these have suffered dam-
age.
en - Warning and Safety instructions
29

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sgsh2

Table des Matières