Repairs - Veromatic MBE01 Installation, Utilisation Et Entretien

Products not able The door is open.
to select, error
The waste bin is not
brewer not in
placed.
position
The brewer is removed.
Espresso/coffee is 1. Brewer is clogged.
much too light
2. Ground powder
and/or only a
(setting) is too fine.
fraction of the
volume.
7.2

Repairs

!
WARNING
Repairs are understood to be anything for which tools are needed to work on the machine. Those repairs
may only be done by authorized technicians (see also paragraph 3.1). For any repairs only original parts
may be used.
The demands made from a technician are:
The technician has to be informed of all laws and regulations regarding electrical connections,
1
electrical symbols, etc.
The technician is very familiar with the machine, by training with Veromatic International B.V. or
2
similar training obtained elsewhere.
The technician uses the instructions, diagrams etc., applicable for this type and model.
3
The technician takes all security precautions for himself and others so as not to be exposed to any
4
danger, electrical as well as mechanical.
The technician is well aware of the applicable guidelines regarding hygiene.
5
The technician must take the following precautions while working on this machine:
Unplug the plug from the wall outlet.
1
Check to see if possible ground connections that have been loosened are functioning again.
2
Observe all general safety directions (see chapter 1)
3
In case some parts have to be replaced, contact your dealer.
To replace parts, use only original (spare) parts, issued by Veromatic International B.V. These satisfy strict
quality demands which assure that the machine continues to function optimally. If original parts are not
used, the warranty is null and void and Veromatic International B.V. is not responsible for possible
damages resulting thereof.
Re-)place brewer, waste bucket and close the
door.
1. Rinse the brewer, or additionally clean
thoroughly by removing/cleaning and cleaning
cycle (see 6.6.1 Weekly maintenance).
2. Ask your dealer to set the grinder more coarse.
68
EN