Taste Card Installation; Using A Customized Configuration; Start Up - Veromatic MBE01 Installation, Utilisation Et Entretien

3.6.2

Taste card installation

a.
d.
/3.4
1. Open the lower panel of the door with the hand removable knurled nuts. (/3.4 a)
2. Place the product stickers on the taste card in correspondance with the standard or desired
configuration. (/3.4 b)
3. Insert the taste cards in the slot of the plastic holder (/3.4 c).
4. Close the inner panel with the knurled nuts. (/3.4 d)
3.6.3

Using a customized configuration

1. Close and re-open the door to activate the Rinse menu.
2. Choose the password option and enter the password. (/3.4 e)
3. Change the configuration of the buttons.
4. Exit the menu.
3.7

Start Up

Open the front door of the machine.
1
Fill the bean canister with coffee beans.
2
Take the instant product canisters out of the machine with the outlet upwards.
3
Fill the canisters to maximum three quarters of the capacity. Don't press the contents. See paragraph
4
3.6.1 for the type and order of the canisters.
!
ATTENTION!
Maximum filling will lead to spillage and cause poor hygiene. Overfilling can prevent proper
functioning of the machine. The products may not be tamped down!
b.
e.
46
c.
EN