Filling Instant Canisters - Veromatic MBE01 Installation, Utilisation Et Entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.6.4

Filling instant canisters

To ensure continued proper operation of this machine, it may only be filled with products that are
prescribed by your dealer.
Open the door of the machine.
1
Open the upper lid.
2
Turn the spouts of the instant product canisters upwards and remove the product canisters from
3
the machine, starting with the left one (see 1-3).
Place the canisters on the counter.
4
Remove the lids of the product canisters.
5
Fill the canisters to maximum three quarters of the capacity.
6
!
ATTENTION!
Maximum filling will lead to spillage and cause poor hygiene. Overfilling can prevent proper
functioning of the machine. The products may not be tamped down!
Replace the lids on the product canisters.
7
Place the product canisters back into the machine.
8
Turn the spouts of the product canisters back into the correct position.
9
Rinse the mixer → see daily maintenance paragraph 6.5.
10
Reset the ingredient counters.
11
65
EN

Publicité

Table des Matières
loading

Table des Matières