Veromatic MBE01 Installation, Utilisation Et Entretien page 57

Rinse the brewer by selecting the function 'Daily rinsing' and then 'Rinse brewer'.
6
!
WARNING: hot water!
Rinse the mixing systems by selecting the function 'Rinse all mixers'.
7
Repeat this rinsing once.
8
Turn the machine off with the mains switch.
9
Carefully remove the drip tray from the machine and remove the grill. Empty the drip tray and clean
10
tray and grill with lukewarm water and a brush. The drip tray may not be placed in the dishwasher
because that may damage the finish.
Remove the waste bucket and empty it.
11
Clean the dispense area.
12
Place the waste bucket back in place. Reinstall the grill in the drip tray and put the drip tray back in
13
its place.
Close the door.
14
Clean the exterior of the machine with a light damp cloth.
15
Turn the machine on.
16
Press the "Go back" key to leave the Rinse menu and to resume normal operation (when the door
17
was not closed).
Take a 'test' consumption of every product.
18
!
ATTENTION:
Be assured that following a maintenance all detachable parts are replaced to their normal position
before restarting the operation of the machine.
The drip tray may not be placed in the dishwasher because it may damage the finishing of the
surface.
58
EN