Hot Water; Jug/Cup-To-Go Function - Veromatic MBE01 Installation, Utilisation Et Entretien

7. Press the Start key to dispense the beverage. The chosen product key will blink during the dispense
(/5-9).
8. After the beverage has been served, the display will show a message 'Your drink is ready'.
!
WARNING:
Hot drinks may cause burn injuries. Keep your hands away from the cup or glass as long as the
machine is dispensing your drink.
5.2

Hot water

Hot water is dispensed from a separate oulet so coffee will not pollute your water or tea. The hot water is
the only function that can be stopped half way the process.
Press "Start" to start hot water dispensing. Wait until dispensing finishes, or press "Start" again to stop
the dispensing halfway.
If hot water is chosen together with the milk strength, then it will make milk and dispense from the coffee
outlet.
5.3

Jug/cup-to-go function

The jug key can be used to fill a small jug or a moderate cup-to-go (max. 12 cm high). This function can
always be selected and deselected during the selection process. When the jug key is lit, the jug has been
selected. The display will show the amount of consumptions that will be dispensed.
To stop the jug function half way, press "Start". It will finish the running dispense, and will not make
additional dispenses.
53
/5-9
/5-10
EN