Télécharger Imprimer la page

Milwaukee M12 Manuel De L'utilisateur page 6

Chargeur à variation de tension
Masquer les pouces Voir aussi pour M12:

Publicité

Les langues disponibles

Les langues disponibles

MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER
IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO
THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED
ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only.
Please consult the 'Service Center Search' in the Parts & Service section of
MILWAUKEE's website www.milwaukeetool.com or call 1.800.SAWDUST
(1.800.729.3878) to locate your nearest service facility for warranty and non-warranty
service on a MILWAUKEE Battery Pack.
LIMITED WARRANTY
USA & CANADA
Every MILWAUKEE power tool* (see exceptions below) is warranted to the
original purchaser only to be free from defects in material and workmanship.
Subject to certain exceptions, MILWAUKEE will repair or replace any part on
an electric power tool which, after examination, is determined by MILWAUKEE
to be defective in material or workmanship for a period of five (5) years** after
the date of purchase unless otherwise noted. Return of the power tool to a
MILWAUKEE factory Service Center location or MILWAUKEE Authorized
Service Station, freight prepaid and insured, is required. A copy of the proof of
purchase should be included with the return product. This warranty does not
apply to damage that MILWAUKEE determines to be from repairs made or
attempted by anyone other than MILWAUKEE authorized personnel, misuse,
alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
Normal Wear: Many power tools need periodic parts replacement and service
to achieve best performance. This warranty does not cover repair when normal
use has exhausted the life of a part including, but not limited to, chucks, brushes,
cords, saw shoes, blade clamps, o-rings, seals, bumpers, driver blades, pistons,
strikers, lifters, and bumper cover washers.
*This warranty does not cover Air Nailers & Staplers; Airless Paint Sprayer;
Cordless Battery Packs; Gasoline Driven Portable Power Generators; Hand
Tools; Hoist – Electric, Lever & Hand Chain; M12™ Heated Gear; Reconditioned
Product; and Test & Measurement Products. There are separate and distinct
warranties available for these products.
**The warranty period for Job Site Radios, M12™ Power Port, M18™ Power
Source, Jobsite Fan and Trade Titan™ Industrial Work Carts is one (1) year
from the date of purchase. The warranty period for the Cables for the Drain
Snake is two (2) years from the date of purchase. The warranty period for the
LED in the LED Work Light and the LED Upgrade Bulb for the Work Light is the
lifetime of the product subject to the limitations above. If during normal use the
LED or LED Bulb fails, the part will be replaced free of charge.
Warranty Registration is not necessary to obtain the applicable warranty on a
MILWAUKEE power tool product. The manufacturing date of the product will
be used to determine the warranty period if no proof of purchase is provided at
the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REM-
EDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE
PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE
TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN
NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPE-
CIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS,
ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS
A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY
PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF
PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITA-
TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY
IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES,
WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE
DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT
PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE
DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED
ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only.
Please consult the 'Service Center Search' in the Parts & Service section
of MILWAUKEE's website www.milwaukeetool.com or call 1.800.SAWDUST
(1.800.729.3878) to locate your nearest service facility for warranty and non-
warranty service on a MILWAUKEE electric power tool.
LIMITED WARRANTY - MEXICO,
CENTRAL AMERICA & CARIBBEAN
TECHTRONIC INDUSTRIES' warranty is for 5 years since the original
purchase date.
This warranty card covers any defect in material and workmanship on this
Product.
To make this warranty valid, present this warranty card, sealed/stamped by the
distributor or store where you purchased the product, to the Authorized Service
Center (ASC). Or, if this card has not been sealed/stamped, present the original
proof of purchase to the ASC.
Call toll-free1 01 (800) 030-7777 to find the nearest ASC, for service, parts,
accessories or components.
Procedure to make this warranty valid
Take the product to the ASC, along with the warranty card sealed/stamped by
the distributor or store where you purchased the product, and any faulty piece
or component will be replaced without cost for you. We will cover all freight
costs relative with this warranty process.
Exceptions
This warranty is not valid in the following situations
a) When the product is used in a different manner from the end-user guide or
instruction manual.
b) When the conditions of use are not normal.
c) When the product was modified or repaired by people not authorized by
TECHTRONIC INDUSTRIES.
Note: If cord set is damaged, it should be replaced by an Authorized Service
Center to avoid electric risks.
SERVICE AND ATTENTION CENTER
Call to 01 (800) 030-7777
IMPORTED AND COMMERCIALIZED BY
TECHTRONIC INDUSTRIES MEXICO, SA DE CV
Av President Masarik #29 piso 7, Col. Polanco V Sección
CP 11560, Deleg. Miguel Hidalgo, CDMX
Model:
Date of Purchase:
Distributor or Store Stamp:
RÈGLES
GÉNÉRALES DE
SÉCURITÉ
AVERTISSEMENT
TIONS. Le non-respect des instructions ci-après
peut entraîner des chocs électriques, des incendies
et/ou des blessures graves.
CONSERVER CES
INSTRUCTIONS
1. CONSERVER CES INSTRUCTIONS - CE MAN-
UEL CONTIENT DES INFORMATIONS IMPOR-
TANTES AU SUJET DE LA SÉCURITÉ ET DE
L'UTILISATION DE L'ENSEMBLE CHARGEURS
LI-ION MILWAUKEE ET BATTERIES LI-ION MIL-
WAUKEE M12™ ET M18™.
2. AVANT D'UTILISER LE CHARGEUR ET LA BAT-
TERIE, LIRE TOUTES LES INSTRUCTIONS DE
SÉCURITÉ ET MISES EN GARDE FIGURANT SUR
LE CHARGEUR DE BATTERIE, LA BATTERIE ET
L'OUTIL.
3.
ATTENTION
TERIES LI-ION M12™ ET M18™ DE MILWAUKEE
UNIQUEMENT DANS LES CHARGEURS AU LI-ION
M12™ ET M18™ DE MILWAUKEE. Les batteries
d'autres types peuvent exploser et causer des dom-
mages et blessures. Ne pas relier un bloc de batterie à
une prise secteur ou un allume-cigare. Les batteries
seront constamment désactivées ou endommagées.
4. UTILISER LES BLOCS DE BATTERIES AU LI-ION
MILWAUKEE SUR LES OUTILS LI-ION MILWAUKEE
COMPATIBLES. Le bloc de batterie et le chargeur ne
sont pas compatibles avec la technologie V™ ni les
systèmes NiCd. L'utilisation avec d'autres outils peut
causer un risque d'incendie, de choc électrique ou de
blessures.
5. ÉVITEZ LES ENVIRONNEMENTS À RISQUES.
N'UTILISEZ PAS LE CHARGEUR SOUS LA PLU-
IE, la neige ou dans les endroits humides ou mouillés.
Ne vous servez pas du chargeur ou de la batterie en
milieux explosifs (émanations de gaz, poussière ou
substances inflammables), car il pourrait se produire
des étincelles, lors de l'insertion de la batterie dans
le chargeur ou lors de son retrait, créant un risque
d'incendie.
6
LIRE ET COMPRENDRE
TOUTES LES INSTRUC-
POUR RÉDUIRE LE RISQUE DE
BLESSURE, CHARGER LES BAT-

Publicité

loading

Ce manuel est également adapté pour:

M1848-59-181048-59-1812