Self-Cleaning; Control Panel - Bosch HGS7282UC Guide D'utilisation Et D'entretien

Automatic Shutoff

Self-Cleaning

Indicators and Other Features
Convection Fan
Control (Panel)
Oven Control Panel
The oven vent is located below the display above the rear left cooktop element. It
is normal to see steam escaping from the vent and condensation may collect on
the backguard and cooktop. This area may become hot when the oven is in use.
Do not block the vent as it is important for air circulation.
The oven will automatically shut off after 12 hours (24 hours if the time format is
set for 24 hour in the Select Function section).
The oven features a self-cleaning function that eliminates the manual labor
involved with cleaning your oven.
Beep - Signals that more information must be entered or confirms the receipt of
an entry. A Beep also signals the end of a program or an oven error.
End-of-Cycle Indicator - To indicate when a mode is finished, 3 consecutive
beeps will sound.
Default Settings - The cooking modes automatically select the default tempera-
ture. These can be changed when a different one is needed.
Flashing Symbol or Number - Signals an incomplete setting and calls for
another step or START to be pressed.
F Number Codes -These codes display when there is a problem with the range.
The convection fan operates during any convection mode. When the oven is oper-
ating in the convection mode, the fan will turn off automatically when the door is
opened. The convection fan does run during self-clean, although not at the begin-
ning of the mode.
Note: On some models, the convection fan also runs during preheat for the bake
mode.
Clock
Light
AM
PM
Time
Off
Cooking
Preheat Temperature
Mode Indicator
Control Knob
Oven Temperature
Cooking Mode
Temperature
Start
Lock Indicator
Getting Started
Figure 3: Oven Control Panel
English 7