Explore Scientific RDP1002 Mode D'emploi page 11

129 x 26 x 70 mm (L x W x H)
Weight (Main unit):
125 g (Exclude batteries)
Temperature display range:
-5 °C to +50 °C (23 °F to 122 °F)
Power:
2x AAA (LR03) 1.5V batteries
Power adapter 5V
NOTE
• When the temperature is lower than -5°C(23°F), the
temperature displays LL.L. When the temperature is
higher than 50°C(122°F), the temperature displays HH.H.
• During alarm rings or RCC receiving process,
temperature detection will be stopped.
EC DECLARATION OF CONFORMITY
Hereby, Folux GmbH declares that the
equipment type with part number: RDP1002
is in compliance with Directive: 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address: www.bresser.
de/download/RDP1002/CE/RDP1002_CE.pdf
RCM DECLARATION OF CONFORMITY
The adapter complies with electrical safety,
EMC and radio spectrum regulatory
requirements for products supplied to the Australia
or New Zealand market.
NOTES ON CLEANING
• Remove the batteries before cleaning.
• Only use a dry cloth to clean the exterior of the
device. To avoid damaging the electronics, do not
use any cleaning fluid.
• Protect the device from dust and moisture.
EN
IT
DE
FR
ES
11