Publicité
Les langues disponibles
Les langues disponibles
OPERATING PROCEDURES
Start-up (Fig. 1, pg. 2)
• Connect the tool to air source with the hose of recommended size.
• Turn on the air compressor and allow the air tank to be filled.
• Set the air compressor regulator to 90 PSI. This air
tool operates at a maximum of 90 PSI air pressure.
• Push the safety lever forward (1) while depressing the trigger (2)
to start operating the tool.
2
1
Shut-down (Fig. 1, pg. 2)
• Release the trigger in order to stop the tool.
• Fix/take away the insert tool.
• When job is completed, turn off the air compressor and store
the air tool after lubrication. For safety, put the tool on a hanger
or on a soft flat pad when not in use.
• When changing grinding attachments and accessories,
always disconnect the air supply to avoid injury.
OPERATING INSTRUCTIONS
• To begin operation, grip tool and depress safety throttle
lever while engaging the trigger.
• To mount stones and other accessories, use the
wrenches supplied with the tool. Always disconnect air
supply before changing any accessories.
• The grinder should be gradually applied to the work surface
until the stone or burr becomes worn. Always replace
excessively worn stones or burrs.
• Make smooth contact with the work and avoid any
bumping action or excessive force.
14
Publicité
