Adjustment Of The Feet; Electrical Connection - Beko RDNE700E40XP Manuel D'utilisateur

Masquer les pouces Voir aussi pour RDNE700E40XP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation
2. Attach 2 plastic wedges on the ventilation cover as
shown in the figure.

4.4 Adjustment of the feet

If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.
Refrigerator / User Guide

4.5 Electrical connection

A
WARNING:
multi sockets in power connection.
B
WARNING:
must be replaced by Authorized
Service.
Our firm will not assume responsibility for any
damages due to usage without earthing and
power connection in compliance with national
regulations.
The power cable plug must be easily
accessible after installation.
Hot surface warning!
The side walls of your product are
equipped with cooler pipes to enhance
C
the cooling system. High pressure fluid
may flow through these surfaces, and
cause hot surfaces on the side walls.
This is normal and it does not require
servicing. Be careful when you contact
these areas.
11 / 32 EN
Do not use extension or
Damaged power cable

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Rdne700e40xbrRdne700e40dzxpRdne700e41xb

Table des Matières