Removal Of The Slide; Description Of The Retrofit Board For A Video Encoder - Videotec MAXIMUS MMX Manuel D'instructions

7.3 Removal of the slide

Unscrew the 3 M4 screws to remove the slide. Before
removing the slide, check that cables are not fastened
with a clip.
Fig. 18
Identify the various parts on the camera: Housing
board (01), retrofit board (02), heating board (03),
blower (04).
Fig. 19
18
04
01
03
02
7.4 Description of the retrofit
board for a video encoder
BOARD DESCRIPTION
Connector/ Function
Terminal
J2 Power supply line/Video signal (camera)
J3 Connection to the housing board
Tab. 7
J2
Fig. 20
J3
MNVCMMX_1821_EN