Preparing The Product For Use; Unpacking; Safely Disposing Of Packaging Material; Installation - Videotec MAXIMUS MBX Manuel D'instructions

6 Preparing the product for
use
Read the product Manual A before
performing any operation.

6.1 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
6.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Explosion-proof communication box in stainless
steel
• O-ring replacement part kit, hexagon socket set
screws
• Instruction manuals
6.3 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.

7 Installation

Read the product Manual A before
performing any operation.

7.1 Range of use

Operating temperature: from -40°C (-40°F) up to
+70°C (158°F).
MNVCMBXSW_2222_EN

7.2 Connection of the cables

Once the cover is removed, you can access the
connectors board equipped with removable
connectors and a switchboard with three RJ45
connectors and a SFP slot.

7.2.1 Connector board description

BOARD DESCRIPTION
Connector Function
J1 Main power supply line
F1 Main power supply fuse
J6 Power supply output
24Vac
J7 Power supply output
24Vac
J8 24Vac output and auxi-
liary contact input
J9 24Vac output and auxi-
liary contact input
F2 24Vac power supply
output fuse
J22 BNC (Video 1) IN
J23 BNC (Video 1) OUT
J26 BNC (Video 2) IN
J27 BNC (Video 2) OUT
J24 8-pole connector IN
J25 8-pole connector OUT
J10 10-pole connector IN
J11 10-pole connector OUT
Tab. 3
Terminals - Nominal
section of the cables
used
from 0.2mm² (24AWG)
up to 2.5mm² (13AWG)
–
from 0.2mm² (24AWG)
up to 2.5mm² (13AWG)
from 0.2mm² (24AWG)
up to 2.5mm² (13AWG)
from 0.2mm² (24AWG)
up to 2.5mm² (13AWG)
from 0.2mm² (24AWG)
up to 2.5mm² (13AWG)
–
–
–
–
–
from 0.2mm² (24AWG)
up to 1.0mm² (17AWG)
from 0.2mm² (24AWG)
up to 1.0mm² (17AWG)
from 0.2mm² (24AWG)
up to 1.0mm² (17AWG)
from 0.2mm² (24AWG)
up to 1.0mm² (17AWG)
11