Products Connection To The 24Vac Power Supply Line; Multi-Polar Connectors (Relays, Alarms, Serial Line); Bnc Connectors (Analogue Video); Connectors For The Wash System - Videotec MAXIMUS MBX Manuel D'instructions

7.2.3 Products connection to the 24Vac
power supply line
Check the requirements of the related VIDEOTEC
products (7.2.10 Related products, page 15).
From the connectors board, take out the removable
connectors J6, J7 and connect the 24Vac power
supply cables of the devices following the polarity
indicated on the screen printing (7.2.1 Connector
board description, page 11).
CONNECTION OF THE 24VAC OUTPUT POWER SUPPLY LINE
Colour
Power supply 24Vac
Defined by the installer
Defined by the installer
Yellow/Green
Tab. 5
7.2.4 Multi-polar connectors (relays,
alarms, serial line)
Consult the installation manuals of the devices to
connect for specifications on relays, alarms and
serial line. Use the multi-polar connectors, on the
connectors board, to transfer the signals from the
devices to the main system, considering the contacts
of the connector J24 correspond to the contacts of
the connector J25 and the contacts of the connector
J10 correspond to the contacts of connector J11 (
7.2.1 Connector board description, page 11).
MNVCMBXSW_2222_EN
Terminals
~
~

7.2.5 BNC connectors (analogue video)

Consult the installation manuals of the devices to
connect for specifications on analogue video signals.
Use the BNC connectors, on the connectors' board, to
transfer signals from the devices to the main system
considering the connector J22, replica J23 and J26
replica J27 (7.2.1 Connector board description, page
11).

7.2.6 Connectors for the wash system

Consult the installation manuals of the wash system
to connect for the relevant specifications. Connect
the contacts of the command relay of PTZ or the
cameras and the power supply cables (24Vac) of the
wash system to the connectors J8 and J9 following
the screen printing on the board (7.2.1 Connector
board description, page 11).
Solenoid valve,
Videotec washing
system (WASEX)
Videotec PTZ
Fig. 5
L
N
J8
RL
13