Sunshield Mounting - Videotec MAXIMUS MMX Manuel D'instructions

Insert the front cover in the housing body, keeping
the closure holes between the cover and the body
aligned.
Be very careful not to damage the o-ring
gasket.
Screw back the previously removed screws.
Screws properties
• Diameter/Screw pitch: M5x0.8
• Material: A4 Class 70
• Screw head: ISO 4762
• Length: 8mm (0.3in)
• Yield stress (min): 450N/mm²
Pay attention to the fixing. Tightening
torque: 9Nm (±0.5Nm).
Fig. 26
MNVCMMX_1821_EN

8.5 Sunshield mounting

The product is supplied with the sunshield already
installed.
For installation needs, the sunshield can be
dismantled. Unscrew the sunshield screws and
remove it. Re-assemble the sunshield before
fastening the housing to the housing support.
Pay attention to the fixing. Tightening
torque: 9Nm (±0.5Nm).
Fig. 27
23