Fuse Replacement; Replacement Of The Front Cover Gasket - Videotec MAXIMUS MMX Manuel D'instructions

Contact the manufacturer for information
on the dimensions of the explosion proof
joint.
For all maintenance interventions, we
recommend you return the product to the
laboratory that will perform all required
operations.
When contacting VIDEOTEC for assistance please
provide the serial number and the identification code
of the device.

11.1 Fuse replacement

CAUTION! To ensure protection against the
risk of fire, replace the fuse with one the
same type and value. The fuse must only be
replaced by qualified staff.
The used fuse is described below.
FUSE REPLACEMENT
Supply voltage
24Vdc
24Vac, 50/60Hz
Tab. 12
Alternatively use a Listed UL certified fuse of equal
characteristics.
Open the housing as described in the relative chapter
(7.2 How to open the housing, page 17).
F1
Fig. 28
26
Fuse (F1)
T 2A H 250V 5x20
11.2 Replacement of the front
cover gasket
In the event of o-ring gasket deterioration replace
it using the gasket supplied. In the absence of the
gasket provided, only use VIDEOTEC original spare
parts.
Replace the gasket being careful to insert it correctly
into its housing.
Fig. 29
MNVCMMX_1821_EN