Amann Girrbach Artex CPR Mode D'emploi page 7

RETRUSION
(17) Open centric, release locking screw of retrusion
insert using allen key. Guide retrusion insert (18)
to required individual value, then relock using allen
key.
Fig.: Retrusion = 2 mm.
U S E R M A N U A L
!
WARNINGS AND
SAFETY ASPECTS:
_ Anterior guidance
Angle of protrusion track = 0°
_ General information
Articulators are precision instruments.
Therefore, it is important to handle them
with care. Please read the following notes:
_ Do not place the articulator in a boil-out
unit, a pressure pot or an ultrasonic bath.
_ For cleaning and care, use only cleaning
agents that are suitable for light metals.
Regarding the use of the cleaning agent,
please follow the instructions of the
according manufacturer. Do not use clean-
ing agents with a pH <5 or >8 since those
might damage the anodized surfaces.
EN
7