Bosch GBM 13 HRE Professional Notice Originale page 12

OBJ_BUCH-2508-002.book Page 12 Tuesday, October 25, 2016 3:11 PM
12 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic. Machines with electronic control and right and
left rotation are also suitable for screwdriving and tapping.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Key type drill chuck
2 Rotational direction switch
3 On/Off switch
4 Lock-on button for On/Off switch
5 Auxiliary handle (insulated gripping surface)
6 Chuck key
7 Handle (insulated gripping surface)
8 Screwdriver bit*
9 Universal bit holder*
10 Securing screw for key type drill chuck
11 Hex key*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Rotary drill
Article number
Rated power input
Output power
No-load speed
Rotational speed under load,
max.
Rated torque
Spindle collar dia.
Max. drilling dia.
– Steel
– Wood
– Aluminium
Chuck clamping range
Weight according to EPTA-
Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
1 609 92A 2AE | (25.10.16)
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted noise levels of the product are:
Sound pressure level 84 dB(A); Sound power level 95 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-1:
Drilling into metal: a
Screwdriving without impact: a
Tapping: a
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
GBM 13 HRE
2014/30/EU, 2006/42/EC including their amendments and
3 601 K49 6A.
complies with the following standards: EN 60745-1,
W 550
EN 60745-2-1, EN 50581.
W 285
Technical file (2006/42/EC) at:
-1
min 0 – 550
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
-1
min 450
Henk Becker
Executive Vice President
Nm 5
Engineering
mm 43
mm 13
mm 40
Robert Bosch Power Tools GmbH
mm 20
70538 Stuttgart, GERMANY
mm 1.5 – 13
Stuttgart, 01.01.2017
kg 2.1
/II
(triax vector sum) and uncertainty K
h
2 2
=3.5 m/s , K=1.5 m/s
h
2
<2.5 m/s , K=1.5 m/s
h
2 2
<2.5 m/s , K=1.5 m/s
h
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
2
Bosch Power Tools