1. Close the door, hold the cover onto the lock body and first mark and make a cut of
3-15 mm on both sides according to the door frame width, z.B. with a metal saw
(Fig. 18).
2. Press down the door bar guides and secure with 2 screws 3.5 x 6.5 mm (Fig. 19).
Caution! Do not overwind.
3. Press down the cover onto the lock body (Fig. 20).
Fig. 18
Abb. 18
Fig. 20
Fig. 19
2.
Ø 3,5 x 6,5 mm
3.
1.
GB
45