Package Contents - Abus PR2700 Notice De Montage Et D'utilisation

Fitting and operating instructions
for the ABUS reinforced door bar PR2700
Contents:
I. Package contents
II. General information
III. Field of application of the PR2700, incl. special accessories
IV. Fitting tools
V. Replacing the door cylinder
VI. Fitting instructions for doors that open inwards
VII. Operating instructions
* VdS recognition
The VdS recognition only applies in connection with the use of a VdS class A or a higher class
of door cylinder.
The reinforced door bar PR2700 with VdS recognition is registered under the number M 110318
VdS.
Appendix:
ABUS special accessories, available from retailers.
PWA2700 – Wall strike plate if there is no installation space available for the normal lock case
PV1820 – Frame passage screw connection for the lock cases
PA1018 – Fixing set for doors that open outwards
DS10 – Spacer discs 10 mm for cylinder protection
Underlay for the lock body – Wooden board enabling improved assembly position for doors
ASP17 – Mounting plate for lock casings
I. Package contents
Package contents of the PR2700 in a standard design (see Fig. 1)
Pos. Quantity
11 1 x
12 1 x
13 2 x
14 2 x
15 2 Sets
16 2 x
17 2 x
18 1 x
19 4 x
10 4 x
11 4 x
12 4 x
13 8 x
14 4 x
15 4 x
16 3 x
36
that open outwards as well as flush doors
Designation
Reinforced door bar PR2700
Cover for the lock body
End piece for the cover
Screw-on plate
Plastic underlay
Lock case
Protective cap for the lock case
Cylinder escutcheon for the outside
Bridging cartridge Ø 6 mm
Dowel Ø 6 mm
Dowel Ø 10 x 120 mm
Screw Ø 3,5 x 6,5 mm
Screw Ø 4 x 35 mm
Screw Ø 4,2 x 22 mm
Hexagon socket head screw M8 x 60 mm
Key for door cylinder