Day-To-Day Operation - La Cimbali M39 GT Dosatron Utilisation Et Installation

After switching on the machine using the on/off switch (14), the
message "PLEASE WAIT" appears on the display. Afterwards,
the menu below appears:
22
wednesday
CHECK BOILER
The entire time that the message remains on the display screen,
the volumetric pump continues to function, which permits water
to fill the boiler. That way, the resistances are not activated
when there is no water in the boiler.
After this phase, all heating elements start to heat. The boiler
temperatures are shown at the center of the display:
22
wednesday
29.6°C
Turning the machine ON and OFF takes place automatically
as programed.
To program the function, please consult the "Customer
Parameters Menu" paragraph.
When the programmed switch off function is active, the fol-
lowing message is displayed:
Wednesday
MACHINE OFF

7. Day-to-day operation

April 2009
15:15:04
April 2009
15:15:04
28.4°C 30.4°C
WITH THE TIMER FUNCTION ON
15:15:04
USE
C
14
Note. When the machine is working in the automatic on/off
function do not use the general switch (14) to switch off the
machine. If this happens, the machine will not be able to
switch on again automatically.
Forced switch on
Press the "STOP/Coffee continue" (C) / "OK" key to force the
machine on again.
Note. Forcing the machine on does not change the program-
med on/off times.
Note. At this point the machine will remain on until the next
switch off time is reached.
To immediately return the machine to "off" as originally pro-
grammed, switch it off and on again using the general on-off
switch (14).
39
C C
OK