Hamilton Beach Eclectrics 63220 Guide De L'utilisateur page 8

840142500 ENv00.qxd
To Attach the Pouring Shield
8
10/25/05 9:11 AM Page 8
1. Make sure Setting Control is set
2. Press up on Mixer Release
3. Attach Bowl and desired Mixer
4. Slide the narrow section of
5. Place Pouring Shield on bowl.
6. Align the narrow section of collar
7. Press up on Mixer Release
8. Turn opening of Pouring Shield
9. Insert Pouring Shield tabs in slots
10. To remove the Pouring Shield,
to O and Mixer is unplugged.
Button and tilt Mixer Head up.
attachment. See page 7 for more
information.
Pouring Shield under Mixer
attachment. See Illustration 1.
See Illustrations 2 and 3.
on Pouring Shield with indent on
beater shaft. See Illustration 4.
Button and tilt Mixer Head down.
to desired position.
on collar. See Illustration 5.
reverse the order of directions.