Before Using The Appliance; Description Of Buttons - Unold EXCLUSIV Notice D'utilisation

DE
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.
EN

BEFORE USING THE APPLIANCE

FR
1. Before taking your ice cream maker into operation for the first time, we rec-
NL
ommend to rinse all removable parts – except the compressor casing (4) –
IT in warm water.
2. Wipe the casing and slot for the ice cream bowl with a damp, well-wrung
ES
cloth.
3. Place the appliance on a dry, level work surface.
PL
4. Due to the storage and transport it might happen in some cases, that the
greasing agent is getting unelastic. If the mixer should not turn automati-
cally when you are using the machine for the first time or after a long pause,
please press the mixer into the ice cream bowl and turn it clockwise by
hand. Usually this helps to loosen the blocking and allows further operation
without any problems.

DESCRIPTION OF BUTTONS

Menu
Start/
Power
Break
(On/OFF)
Rotary knob (for time adjustment)
Turn the knob to select the desired time. If you turn the knob to the left (coun-
ter-clockwise), the time will be shortened in 1-minute increments, if you turn the
30 von 112
Button "Power"
When the plug is in the power socket, the appli-
ance is in the stand-by-mode. The display shows
"00". Press the button in order to turn on the ap-
pliance. The display lights up and shows "60:00".
In order to turn off the appliance during operation,
press this button as well.
Button "Menu"
With this button, you choose between the three
preparation programmes "Mix & Freeze", "Freeze"
Rotary
or only "Mix". When the appliance is in operation,
knob
if you press the button for approx. 3 seconds, the
appliance will return to the original settings.
Copyright UNOLD AG | www.unold.de
Stand 20.4.2020