Description Of The Mixing Pump; Explanatory Diagram (Fig. 1) - WAGNER PLASTMAX Mode D'emploi

PlastMax
2.3

DESCRIPTION OF THE MIXING PUMP

The mixing pump is composed of a frame with wheels, to which
a container with safety guard, an electro-motor with mixer, a
water system with pressure booster pump and a compressor
are fitted.
The pre-mixed or dry material is filled into the container. Inside
the container are mixers driven by a gear motor. When the
dry material is processed, it is mixed with water supplied by
the water system. The water system takes the water from the
water network or from a container designed for the purpose.
The water through-put is regulated by a volume regulator and
a flow meter.
The mixer has a helical rotor pump, which pumps the material
by mortar hose to the spray lance. In addition to the mortar
hose, the spray lance is also connected to an air hose. The
material is atomised at the spray lance with the air supplied
by the compressor.
2.4

EXPLANATORY DIAGRAM (FIG. 1)

1 Electric motor with transmission
2 Safety guard
3 Hopper
4 Lever to set the tilt angle
5 Material outlet
6 Cleaning tool for water connection
7 Cleaning tool for mixing chamber
8 Wheeled frame
9 Compressor
10 Electricalpanel
11 Water flow meter
12 Water volume regulator
13 Brake
14 Pressure booster pump
15 Water connection
16 Cleaning connection for mortar hose
17 Air connection
12
11
10
9
8
17
16
1
2
7 6
15
14
GB
3
4
5
13
35