KitchenAid 740-0781 Instructions D'installation Et Guide D'utilisation Et D'entretien page 20

Grilling with Infrared heat produces a high heat which quickly chars
foods. Searing creates and locks in flavors on the outside and
creates a beautifully- browned surface and texture. The result is a
crisp, flavorful outside with a tender, juicy inside.
◼Lift the lid on the infrared side sear burner
◼Check that the sear grill grate is in place before using the sear
burner
◼Turn on the sear burner and preheat for 5 minutes
◼Ensure that foods are fully thawed and that excess fat is trimmed
off prior to searing
◼Place food on sear grate. Sear food for 1 to 2 minutes on each
side, then move the food to the main grill cooking surface to finish
grilling to desired doneness
◼Turn off the side sear burner and allow burner to cool before
closing lid
Lighting the Infrared Searing Burner
1.Open the hood completely. Do not light burner with the hood
closed.
2.Do not lean over the grill.
3.Push in and turn the control knob to IGNITE/ON. You will hear
the "snapping" sound of the spark.
4.When the infrared searing burner lights, continue to hold the knob
in for another 10 seconds, then release the knob and burner will
stay lit. You will hear the "snapping" sound of the spark until the
knob is released.
IMPORTANT: If the infrared searing burner does not light
immediately, turn the burner knob to OFF and wait 5 minutes
before relighting.
Manually Lighting the Infrared Searing Burner
1.Open the hood completely. Do not light burner with the hood
closed.
2.Do not lean over the grill.
3.Remove the manual lighting extension (see the following
illustration) and attach a match to the split ring.
4.Strike the match to light it.
Using Your Infrared Searing Burner
5. Gently hold the lit match close to the infrared searing
burner.
A.
6. Push in and turn the control knob to IGNITE/ON. Hold this
knob in for 10 seconds after the burner is lit. You will hear
the "snapping" sound of the spark until after the knob is
released.
IMPORTANT: If the infrared searing burner does not light
immediately, turn the searing burner control knob to OFF
and wait 5 minutes before relighting.
7. Remove the match and replace the manual lighting
extension in its holder.
20
A
Lighting extension