Technical Data; Before Starting The Equipment - EINHELL GC-EM 1030 Mode D'emploi D'origine

Important. Due to the high risk of bodily injury to
the user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vege-
tation, planted roofs, or balcony-grown grass, to
clean (suck up) dirt and debris off walkways, or
to chop up tree or hedge clippings. Moreover, the
lawn mower may not be used as a power cultiva-
tor to level out high areas such as molehills.
For safety reasons, the lawn mower may not be
used as a drive unit for other work tools or toolkits
of any kind, unless they have been expressly per-
mitted by the manufacturer.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: ................... 220-240 V ~ 50/60 Hz
Power consumption: ............................... 1000 W
Motor speed: .......................................3400 min
Cutting width: .............................................30 cm
Cutting height adjustment: .....30-70 mm; 3 levels
Grass basket capacity: ............................ 25 liters
L at the operator position: ............... 80.4 dB(A)
pA
K uncertainty: ...................................... 3 dB(A)
pA
L sound power level: ......................... 96 dB(A)
WA
K uncertainty: ...................................... 3 dB(A)
WA
Vibration at the handlebars ah: ........... 2,285 m/s
K uncertainty: ...........................................1.5 m/s
Protection class: ...........................................II /
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with the standards EN ISO 3744: 1995,
EN ISO 11201: 1995, and EN ISO 20643: 2005..
Anl_GC_EM_1030_SPK7.indb 23 Anl_GC_EM_1030_SPK7.indb 23
GB
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
•
Limit your working time
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
Warning!
This equipment generates an electromagnetic
fi eld during operation. Under certain circumstan-
ces this fi eld may actively or passively impede
medical implants. To reduce the risk of serious
or fatal injuries, we recommend persons with
medical implants to consult their doctor and the
-1
manufacturer of the medical implant prior to using
the equipment.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
2
Warning!
2
Always pull the power plug before making
adjustments to the equipment.
The lawn mower is delivered unassembled.
The complete push bar and the grass basket
must be assembled before using the lawn mower.
Follow the operating instructions step-by-step
and use the pictures provided as a visual guide to
easily assemble the equipment.
- 23 -
16.10.14 10:14 16.10.14 10:14