Operation; Setting The Clock; Setting The Timer; Control Lock - Furrion FMCM15-BL Manuel D'instructions

Operation

Setting the Clock

Example: setting clock display for 9:00:
1. Touch Clock pad once for AM, touch twice
for PM.
2. Enter time using number pads.
3. Touch Clock pad again.

Setting the timer

Example: setting timer for 5 minutes:
1. Touch Timer pad once.
2. Enter desired time using number pads.
3. Touch Timer pad.
NOTE: When the timer has reached the
end of set time, you will hear beep alerts
indicating the timer has run out.

Control Lock

You may lock the control panel to prevent the
microwave from being accidentally started or
used by children.
The control lock feature is very useful when
cleaning the control panel. The lock will
prevent accidental programming when wiping
the control panel clean.
1. Example: to set the control lock ON:
Touch and hold the Stop/Cancel pad for
more than 3 seconds. The Lock icon will
appear in the display window along with
2 beeps.
2. Example: to change the control lock from
ON to OFF:
Touch and hold the Stop/Cancel pad for
more than 3 seconds. The Lock icon will
disappear in the display window.
11

Using the Stop/Cancel key

This feature will let you quickly stop or cancel
the cooking process.
Touch the Stop/Cancel pad to:
1. Erase if you have entered wrong
information.
2. Cancel timer.
3. Press pad once to pause the oven
temporarily during cooking.
(Touch START/+30SEC. pad again to
resume cooking.)
4. Return the time of day (clock) to the
display after cooking cycle is completed.
5. Cancel a program during cooking, touch
twice.

Using the Start/+ 30SEC. key

This feature will let you quickly start or add
30 seconds
Touch the START/+30SEC. pad to:
1. Start programmed cooking.
2. Start cooking for 30 seconds at 100%
power level.
3. Extend cooking time in multiples of 30
seconds each time this pad is touched
during microwave cooking.
Example: to add 1 minute of cook time
during 80% microwave cooking:
Press START/+30 sec pad twice.
Heating with High Power Level
Example: to heat for 5 minutes at 100%
power:
1. Press Microwave pad.
2. Use the number pads to enter desired
heating time (cook time may be set up to
99 minutes and 99 seconds).
3. Touch START/+30SEC. pad.
When heating has finished you will hear
beeps.